starzen Posted October 10, 2013 Share Posted October 10, 2013 got my CCR i bought last year for christmas out of storage. Plugged it in and noticed that half the CCR was lit right away should mention i cut the CCR in half to make two arches. Worked fine last year Now when running it the first half works and the second half is all on white except for 3LEDs (1 pixel) that is green all the pixels on the first half are working fine any ideas ? will try to resolder the connection between the two halfs but i dont see anything wrong with it Mike Link to comment Share on other sites More sharing options...
starzen Posted October 11, 2013 Author Share Posted October 11, 2013 found it. The first smd resistor had a broken solder joint. little reflow and it is working again Link to comment Share on other sites More sharing options...
Recommended Posts