ChristmasJim Posted October 9, 2013 Share Posted October 9, 2013 Will the Input Pup (or the triggers from the Headers on a CTB board) work in triggering a mini-director? I know that the mini-director has triggers on the back, but I was hoping not to use them since the director is not close to the button I want to use for the trigger, but a controller is. Link to comment Share on other sites More sharing options...
Greg Young Posted October 10, 2013 Share Posted October 10, 2013 Depending on the controllers you have in your display, they may also have inputs (usually 3 per controller). I run about 150 ft of multi conductor cable from my input box (6 button) to 2 LOR controllers mounted back in the garage. Link to comment Share on other sites More sharing options...
Recommended Posts