ClydeL Posted April 30, 2013 Share Posted April 30, 2013 So I'm opening up my sequences from the past 5 years and they load and play just fine. However, the labels are missing. When I go into the sequence editor: Tools--> Channel Config all of the channel labels are listed. I can edit them too. But when I view the main sequencing screen, no channel labels? What's going on with this? I've looked at all types of visual settings and can't find anything to fix it. Link to comment Share on other sites More sharing options...
John Slade Posted April 30, 2013 Share Posted April 30, 2013 (edited) I think they are just minimized (so to speak). Left click once on the edge where your tools end and the graph begins. Where the channels are supposed to be... Edited April 30, 2013 by John Slade Link to comment Share on other sites More sharing options...
scottam67 Posted April 30, 2013 Share Posted April 30, 2013 You can also click on "View" on your toolbar. The first item in drop down is "Channel Labels". Checking this will bring them back. Link to comment Share on other sites More sharing options...
ClydeL Posted May 2, 2013 Author Share Posted May 2, 2013 Found the problem. Seems that even though the channels were wide enough for the length of the channel lables, the HEIGHT of the channel was causing the trouble. After resizing the height, the labels returned! Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts