T17443 Posted January 6, 2013 Share Posted January 6, 2013 Playing with my first set of CCBs. Set up all going well and have been able to get the lights working in Sequnce Editor. However when I add a RGB device i only get the first string to show up. If I add another device it used the same channels (1 - 160). i can go in and change the channel numbers manually and they then work, but I really dont want to do this manually. What am i doing wrong. I did set the controller up to show it had 2 strings using the hardware utility. Link to comment Share on other sites More sharing options...
Don Posted January 6, 2013 Share Posted January 6, 2013 When you add the CCD device, do your options look something like this?Those options should give you a new channel group called 'CCD 01' that will have a + sign to the left of it. Click on that + and you will see the two strings. 1 Link to comment Share on other sites More sharing options...
T17443 Posted January 6, 2013 Author Share Posted January 6, 2013 Got it. Thanks for the help. Good thig this newbie is starting in January:-) Link to comment Share on other sites More sharing options...
Ron Boyd Posted January 6, 2013 Share Posted January 6, 2013 Got it. Thanks for the help. Good thig this newbie is starting in January:-)Yes, that's a good thing. You will find that you always don't have time for something in your show, but somehow you get it done . Welcome to the addict.......I mean hobbyRon Link to comment Share on other sites More sharing options...
Recommended Posts