hoek.fred Posted December 29, 2012 Share Posted December 29, 2012 I read how everyone ops to use SPT1 & SPT2 cable to wire up their display, but the one thing I haven't seen is how to people plug in the string of lights to the SPT cable.I have a LV lighting system that uses the vampire connectors so I'm familiar with the one that hardwire to the device being connected. Link to comment Share on other sites More sharing options...
MikeH Posted December 29, 2012 Share Posted December 29, 2012 I hope I understand your question correctly.... you would use a female vampire to connect your lights to the SPT and then use a male vampire to connect the SPT to your device. Just like making an extension cord.MikeH Link to comment Share on other sites More sharing options...
WilliamS Posted December 29, 2012 Share Posted December 29, 2012 if its 120 lights its simple. the controller can have in its easiest form 16 female dongles hanging out of it like udders of a cow. You use a male end on one of the the spt wire you cut to lenght that will go from the controller to the light string you want on that channel, the female end will be at the light string. Easy as pie. DO NOT SCREW UP AND POWER LV LIGHTING ON A LOR AC BOARDMikeH said it best, you making a long extension cord. Link to comment Share on other sites More sharing options...
hoek.fred Posted December 29, 2012 Author Share Posted December 29, 2012 Is this what you use?http://www.noveltylights.com/SPT2-Female-Sockets-Green.html Link to comment Share on other sites More sharing options...
WilliamS Posted December 29, 2012 Share Posted December 29, 2012 I used all SPT1 but yeah some concept. Link to comment Share on other sites More sharing options...
MikeH Posted December 29, 2012 Share Posted December 29, 2012 Is this what you use?http://www.noveltyli...kets-Green.htmlThose are the female plugs. These are the male plugs > http://www.noveltylights.com/SPT-2-Male-Vampire-Plugs-Green.html Link to comment Share on other sites More sharing options...
Recommended Posts