tonyski Posted October 30, 2012 Share Posted October 30, 2012 Hi Everyone,I have been using Superstar for my 12 ribbon CCR tree sequencing but came to a point where I wanted a white twinkle.I couldn't do it in superstar and remembered about the macro functions that are built into the CCR controller.I went old school and started messing with that and with a little trial and a few more errors, got the desired outcome. But that led to another issue.My sequence starts with about 3 seconds of a white twinkle that uses the fill from end to controller macro (#2) followed by another 3 seconds of just twinkle.It seems like no matter what I do in the cells immediately after the second twinkle, nothing shows up in the visualizer.If I put a blank cell after the twinkle effect and then put whatever I want into the sequence, it seems to work but anything that starts in the cell immediately after the twinkle does not show up in the visualizer.I don't have my ccrs set up yet so I can't conveniently test it "Real World"Am I missing something?Tony Link to comment Share on other sites More sharing options...
Recommended Posts