ItsMeBobO Posted October 28, 2012 Posted October 28, 2012 In my setup the lights are being held in place with cable ties around the four conductor wire. The last bulb is drooping (just a little) since its only held on one side. There is some sort of non-wire white plastic in wires place on the last bulb. Appears it was ground off as there is white dust on the base. Improvement suggestion would be leave a little something hanging off to attach with.
Ron Boyd Posted October 28, 2012 Posted October 28, 2012 +1I found that a little hot glue on the bottom will hold it quite nicely.
Recommended Posts