Patrick4265 Posted October 22, 2012 Share Posted October 22, 2012 So frustrated today. I spent since 10am today trying to set up sequences for my 1602mp3 and am not having any luck. When I plug the SD card in the controller boots up and just as I thinking I'm about to see the fruits of my labor....a flashing yellow status light. Anybody have any advice? Link to comment Share on other sites More sharing options...
Don Posted October 22, 2012 Share Posted October 22, 2012 I don't remember the colors, just the letters. E, R, C, P.P is for power, and C isn't used. I can't remember what color the E and R lights are.Which one was blinking? Link to comment Share on other sites More sharing options...
Patrick4265 Posted October 22, 2012 Author Share Posted October 22, 2012 It is the R light Link to comment Share on other sites More sharing options...
Don Posted October 22, 2012 Share Posted October 22, 2012 The answer is going to depend on how the light was blinking. According to the docs..Steady blink if the DC-MP3 is waiting for a scheduled show to start.Blink twice, pause, blink twice, pause, … if waiting for an input trigger to start a show and/or waiting for a scheduled show.So either you had a show loaded and were waiting on a show to start, or you set one up with a trigger.As a test, create a show that will run anytime power is applied. If you are using the Simple Show Builder, then simply select 12:01a to 11:59p for your shows to run. If it doesn't run then, either your sequences are not set up correctly, you have a bad SD card, or the director has gone bad. (Or a number of other things, really.) Link to comment Share on other sites More sharing options...
Recommended Posts