Guest wbottomley Posted August 27, 2012 Share Posted August 27, 2012 Has anyone had trouble programming RGB in 3.6.0? Why? I set up 30 channels and it works except for blue. When a sequence is running, blue is offset by one row. In order to get the last ball to light up in blue, I have to put a command in a row below where it suppose to go. But, the channel address does not pertain to it. Weird stuff I know. I hope this makes sense. I'm using Holiday Coro RGB modules. I think it's not a hardware problem with this issue. I have another one with them lighting up in BRG order. Attached is the testing sequence.ball tree test.las Link to comment Share on other sites More sharing options...
Guest wbottomley Posted August 27, 2012 Share Posted August 27, 2012 (edited) I may have found the solution here.I'm using the regular LOR USB adapter, not the voltage booster one. Edited August 27, 2012 by wbottomley Link to comment Share on other sites More sharing options...
flogger7 Posted August 27, 2012 Share Posted August 27, 2012 Are you referring to having to offset all the channels +1 or a different solution? Link to comment Share on other sites More sharing options...
Guest wbottomley Posted August 28, 2012 Share Posted August 28, 2012 Yes... but I think it's two channels since it's BRG. Link to comment Share on other sites More sharing options...
Guest wbottomley Posted August 28, 2012 Share Posted August 28, 2012 Yes... but I think it's two channels since it's BRG.But... E1.31 or sACN should take care of this. Link to comment Share on other sites More sharing options...
Recommended Posts