mr_zuccherino Posted August 7, 2012 Share Posted August 7, 2012 I am doing a long show aprox. two hours. I want to break the show up into themed sections and include a switch for each section. I currently have a DC-mp3 and a CTB16D in one enclosure. I had previously used the DC to run shows but would like to use the computer now due to complexity and rds needs.My question is this can I run the show from the computer but use the switch inputs on the DC, without loading anything onto the DC? Link to comment Share on other sites More sharing options...
-klb- Posted August 7, 2012 Share Posted August 7, 2012 I don't think you can use the DC-MP3 as a trigger input to a show PC. You can get 3 inputs off the CTB16D, and 3 more off a second CTB16D. Or you could get a servo dog controller, and use the exact same header to hook up 6 inputs. Link to comment Share on other sites More sharing options...
mr_zuccherino Posted August 7, 2012 Author Share Posted August 7, 2012 I didn't know about the Servo Dog could do that I will look into it thanks. Link to comment Share on other sites More sharing options...
Vic Fortenbach Posted August 7, 2012 Share Posted August 7, 2012 (edited) Don't forget, Dan mentioned that a new "input pup board" (LOR inputs) will be coming soon. Edited August 7, 2012 by Vic Fortenbach Link to comment Share on other sites More sharing options...
Recommended Posts