servodog headers

[bobschm]

I've searched everywhere. What are you guys using to connect to the servo pins on the servodog? Does LOR make some kind of 24 pin ribbon or header?

[rstately]

If you're making your own cables you can use these,
http://www.servocity.com/html/servo_connectors___pins.html

For the input header you can use this,
http://store.lightorama.com/mp3dicohe.html

hope this helps.

[Denise Brunner]

from my servos I go directly onto the board, I use an extension cable to add length between board and servo. I don't use any header at all.

[Al in Raleigh]

I think you are referring to servo lead extension cables. Here is where I bought mine.You can buy them in different lengths. The link is to just one example.
http://www.dealextreme.com/p/1000mm-3-pin-servo-leads-connection-extension-cables-10-pack-11987

[dave carlstedt]

I have used servocity products as previously mentioned. They are not the cheapest, but have some unique items and are quick in delivery. I have also ordered bulk servo wire (50'), as well.
http://www.servocity.com/html/servo_wire__bulk_.html

And, if you don't wish to assemble your own connectors, you can order the short lengths of ready made M/F connectors.

Not sure of max length to operate a servo, but I tested mine at 10' and no problems.