Caleb Linburg Posted March 18, 2012 Share Posted March 18, 2012 Does anyone know how or have a schematic of the LOR Dongle or the Holiday Coro programming dongle? I need to run some RGB lights but I lost my LOR dongle somehow . Thanks Link to comment Share on other sites More sharing options...
Dennis Cherry Posted March 18, 2012 Share Posted March 18, 2012 What do you need to know? Link to comment Share on other sites More sharing options...
Caleb Linburg Posted March 18, 2012 Author Share Posted March 18, 2012 How the cat5 is wired to the USB? I assume there is also some circuitry in there also. Link to comment Share on other sites More sharing options...
bdeditch Posted March 18, 2012 Share Posted March 18, 2012 Caleb Linburg wrote:How the cat5 is wired to the USB? I assume there is also some circuitry in there also.You can't use any USB cable to program them. There is a special circuit built into the USB plug. Link to comment Share on other sites More sharing options...
dmoore Posted May 4, 2012 Share Posted May 4, 2012 While I have not tested it, a customer reported to me that the shift-by-one channel issue in LOR S3 has now been resolved and the dongle can be used with LOR S3 for output. I would not expect LOR to support this as an output standard - it appears they will always direct you to a "supported" Enttec model. Link to comment Share on other sites More sharing options...
Recommended Posts