Discotech24 Posted March 18, 2012 Share Posted March 18, 2012 DOes anybody know if it is possible to control any other lights with Superstar other than the CCR/CCB and Firefli lights. Those are all that is listed in the software but I was curious to know if anyone else has had luck programming alternate light strings. I have a DMX controller controlling a 5 meter strip I purchased from Ray. I can use LOR S3 but it would be easier if I could use Superstar. Any tips would be greatly appreciated. Link to comment Share on other sites More sharing options...
flogger7 Posted March 18, 2012 Share Posted March 18, 2012 I sequence in superstar (as CCR's) then export back to S3 to run on my dmx pixels. It's a n extra step but not really a big deal.If there is a way to actually control these directly from superstar, I'm unaware of it....but I'm relatively new to Rgb so one of the old timers would be a better source to confirm if it can be done. Link to comment Share on other sites More sharing options...
Discotech24 Posted March 18, 2012 Author Share Posted March 18, 2012 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts