rjm12rjm12 Posted November 4, 2013 Share Posted November 4, 2013 Hi Bob, Now I have a problem with the clipboard, it must be something simple, any thoughts? Thanks, Rob 1.) I have used Papagayo 1.3.5.3 and exported a voice at 25 fps.2.) I then used PapagayoToLOR.exe to read in the "dat" file and create an "lcb" file.3.) Then in LOR 3.10.12 I add a clipboard and load in the "lcb" file.4.) Then I right click into a voice timing of Fixed Grid: 0.04, but the "paste" is grayed out. Some of the "dat" fileMohoSwitch11 FV4 etc7 O10 etc16 E19 etc22 AI25 etc31 O34 MBP37 AI40 etc43 WQ46 AI49 etc52 AI55 etc58 AI61 L64 E67 etc70 AI73 MBP76 E79 etc Some of the "lcb" file<?xml version="1.0" encoding="UTF-8" standalone="no"?><channelsClipboard version="1" name="Frosty42sec_v2"><cellDemarcations><cellDemarcation centisecond="0"/><cellDemarcation centisecond="12"/><cellDemarcation centisecond="24"/><cellDemarcation centisecond="36"/><cellDemarcation centisecond="60"/><cellDemarcation centisecond="72"/><cellDemarcation centisecond="84"/><cellDemarcation centisecond="96"/><cellDemarcation centisecond="120"/><cellDemarcation centisecond="132"/><cellDemarcation centisecond="144"/><cellDemarcation centisecond="156"/><cellDemarcation centisecond="168"/><cellDemarcation centisecond="180"/><cellDemarcation centisecond="192"/><cellDemarcation centisecond="204"/><cellDemarcation centisecond="216"/><cellDemarcation centisecond="228"/><cellDemarcation centisecond="240"/> Link to comment Share on other sites More sharing options...
ItsMeBobO Posted November 4, 2013 Author Share Posted November 4, 2013 Usually means nothing to paste. is the radio button circle next to th cb name selected? Link to comment Share on other sites More sharing options...
rjm12rjm12 Posted November 5, 2013 Share Posted November 5, 2013 Yes that is what is weird. If I place some "on" values on the graph, I can then copy and paste those, just not from the clipboard. Rob Link to comment Share on other sites More sharing options...
rjm12rjm12 Posted November 6, 2013 Share Posted November 6, 2013 Hi All, This was my fault, I rushed through watching the video on PapagayoToLOR and glanced over the section where it says to use channels 1-5, I was using 4-8. Once I fixed that it all worked, sorry for the confusion. Thanks, Rob Link to comment Share on other sites More sharing options...
Recommended Posts