Discotech24 Posted February 22, 2012 Share Posted February 22, 2012 I just ordered this controller and and this strip from Ray Wu.http://www.aliexpress.com/fm-store/701799/209915969-509914025/LT-DMX-2801-DMX-SPI-Decoder-support-WS2801-WS2803-drving-IC.htmlAnd also ordered this strip.http://www.aliexpress.com/product-fm/465132154-5m-led-digital-strip-DC5V-input-WS2801IC-256-scale-32pcs-IC-and-32pcs-5050-SMD-RGB-wholesalers.htmlAlso ordered a second USB485 from Light-O-Rama. From everything I have read in the DMX forums I should just be able to hook up the second USB in DMX mode and then hook up cable I made the connect RJ45 to the 3 pin XLR input on the DMX controller and everything should work fine. If anybody thinks this may not work please let me know. Thanks. Link to comment Share on other sites More sharing options...
WilliamS Posted February 23, 2012 Share Posted February 23, 2012 You will have to make the crossover cable to get to lor wiring, not hard at all. Then of course in the Sequencer under hardware setup your second USB485 to DMX / open and setup your channels. Link to comment Share on other sites More sharing options...
Preston Meyer Posted February 23, 2012 Share Posted February 23, 2012 I am running two USB485B's (one for DMX and one for LOR)without any problems. LOR system has two CTB16's and a color ribbon, DMX has several RGB lights, a strobe, and a couple of 4 pak dimmers. Initialized the DMX USB by itself through the hardware program. Everything works fine as advertized. Remember to turn on DMX in S3 also. Link to comment Share on other sites More sharing options...
Discotech24 Posted February 23, 2012 Author Share Posted February 23, 2012 Thanks for the tips. Link to comment Share on other sites More sharing options...
Recommended Posts