hcl1 Posted January 3, 2012 Share Posted January 3, 2012 So I have a couple of question. I have been asked to take my light show to a public show. But I need I would like to also interface into some DMX over ethernet devices they have. What other hardware do i need to make this happen. These are mostly just large floods and such. Some of these floods use 20 amps of power each so a LOR board cannot work for them.Any other software that works better with DMXAlso is there another version of the hardware ultility that would give a sort of virtual console for DMX Link to comment Share on other sites More sharing options...
bdeditch Posted January 3, 2012 Share Posted January 3, 2012 Just look at the topics in the forum you posted in, all the answers are there. Link to comment Share on other sites More sharing options...
hcl1 Posted January 3, 2012 Author Share Posted January 3, 2012 Thanks for such wonderful help. I am looking through the topics. Link to comment Share on other sites More sharing options...
Ken Benedict Posted January 3, 2012 Share Posted January 3, 2012 Running through an iDMX1000 into a theatre console and merging the DMX for a big public show works well. Uses over 500 amp service and DMX dimmers that can easily handle 20 amps each. Uses around 350 DMX channels and is sent wirelessly to another building and a 60' tree.Had to do a little math on the circuit loading, but show ran just fine.Positive reinforcement. Link to comment Share on other sites More sharing options...
Recommended Posts