TAFratino Posted December 21, 2011 Share Posted December 21, 2011 I received a new controller yesterday configured it and it seamed to run ok all last night. Tonight the power supply failed. I replaced it with 12Vdc rated at half the amps. Plugged it into the new controller and all the lights came on and stayed on. disconnected power held in the reset and repowered it with the same results all ON no control. I plugged in the controller that I boxed for return and it is working the same as it did before, streaks the pattern but randomly does not shut off. I know the controller plugged in from the other arch works but i never swapped them for more than a test. Can the Ribbon be the problem? It started to drizzle, the controller was wrapped in a plastic back with all the wires comimg out the bottom. Link to comment Share on other sites More sharing options...
Recommended Posts