DocBrown86 Posted December 9, 2011 Share Posted December 9, 2011 I have the iDMX box, the USB485B or whatever it is, the advanced software version. I have no LOR controlled stuff, only DMX.I have a 48ch dimmer box, with a control interface in it that sends a signal to the channels. It has worked in the past when I ran PCStage, but now with LOR, the output on the interface box will not send the signal any further.Any ideas? Link to comment Share on other sites More sharing options...
DocBrown86 Posted December 9, 2011 Author Share Posted December 9, 2011 Basic, smack on the forehead troubleshooting +1, me...0Re-routed the DMX line to end on the big dimmer, rather than start there. For now, problem solved. Link to comment Share on other sites More sharing options...
Recommended Posts