vincerules Posted December 7, 2011 Share Posted December 7, 2011 I have 2 CCR's in my display. Before tonight, I was just using Instant Sequences so I didn't know if the colors were right or not. Tonight I put in my first completely done sequence that I made myself. I noticed that one of my CCR's is working right, but the other shows random colors at times, and also when it should be off, some sections stay on with the last color that was on it. Anything I can do to fix this? Link to comment Share on other sites More sharing options...
dstevens Posted December 7, 2011 Share Posted December 7, 2011 Check channels 151-157 and make sure they're off if you are not using macros. I found this when programming mine. I had a few cells on those channels that had a low intensity set (i.e. Link to comment Share on other sites More sharing options...
vincerules Posted December 7, 2011 Author Share Posted December 7, 2011 Ok, I got it fixed. My CCR's were in legacy mode, changed it to normal and its good now Link to comment Share on other sites More sharing options...
Recommended Posts