CUTTHEMUSIC Posted December 7, 2011 Share Posted December 7, 2011 Previously I was having issues with 3.1.2 so I did a fresh install of XP and then installed 3.1.4. My show ran fine for the last few days but tonight my show suddenly stopped after running for about 20 minutes. Once I noticed the show had stopped I went to the show controller pc and found that LORMonitor and LORTray where listed as not responding in the task manager. CPU was 100% and memory usage was around 120 meg. I rebooted the machine by doing a hard reboot because going to start > restart did not respond. Again, this is a clean install of XP Pro with no antivirus or any other apps running on it. Any ideas? Link to comment Share on other sites More sharing options...
cenote Posted December 7, 2011 Share Posted December 7, 2011 Be sure all your updaters all off. I also had Adobe updater running, and seem to lock it up sometimes. Link to comment Share on other sites More sharing options...
CUTTHEMUSIC Posted December 7, 2011 Author Share Posted December 7, 2011 Thanks but this is a bare XP machine. Nothing except XP and LOR installed. Link to comment Share on other sites More sharing options...
jeffl Posted December 7, 2011 Share Posted December 7, 2011 Bob has said if this happens to first pull the USB cable hooked to the adapter. If this frees the machine then it's RFI and needs a USB cable with ferrite chokes or a better cable. Link to comment Share on other sites More sharing options...
Recommended Posts