Sparky Griswold Posted December 7, 2011 Share Posted December 7, 2011 I have 5 of the LOR 160xW. one of them is not working. being recognized by the system and show runs on other 4 no problem. Just having issues with #2. fuses and power are good. Solid Red led as well.Is there a reset button on these units? not sure what else to do for the system to recognize it.Thanks for help.BryanPhx, AZ Link to comment Share on other sites More sharing options...
Guest guest Posted December 7, 2011 Share Posted December 7, 2011 http://forums.lightorama.com/forum76/30855.htmlA good troubleshooting doc is attached in this thread.To reset, power down, turn unit ID dials to 00, power up, wait 30 seconds, power down, reset unit ID, power up, test.So is this problem controller being seen by the hardware utility, or not? Definitely recommend testing it all by itself with the HU. Link to comment Share on other sites More sharing options...
Sparky Griswold Posted December 7, 2011 Author Share Posted December 7, 2011 Thank you. Yes it sure is which is why I'm confused. I will try that reset process. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts