sabinlights Posted December 1, 2011 Share Posted December 1, 2011 When moved a song from one computer and try to save I get Invalid procedure call or arqument. How or what can I do? Link to comment Share on other sites More sharing options...
dougd Posted December 2, 2011 Share Posted December 2, 2011 Not sure if this will help or not. I ran into a problem when I got the same error when trying to save a sequence. My problem was I had saved a sequence to a flash drive. I then removed the flash drive. The sequence was still open in the sequence editor, I made some more changes. When I went to save the sequence it would not let me save, obviously, but also it wouldn't let me save as either. So the only way to avoid losing my changes I put the flash drive back in the computer and then did a save and then a save as back to my computer. Hope that makes sense. Link to comment Share on other sites More sharing options...
sabinlights Posted December 3, 2011 Author Share Posted December 3, 2011 Yep that is what I found out also. Thanks for your advice. Hope this will help some one with the same problem. Link to comment Share on other sites More sharing options...
Recommended Posts