Jump to content

CCR setup using DMX


Dennis Cherry
 Share

Recommended Posts

Dennis Cherry

The manuals are vague on setting up a CCR for DMX, here is my take.

Only three CCR's per universe configured as:

ID 01 = 1-160 (uses 1-157)
ID 0b = 161- 320 (uses 161- 317)
ID 14 = 321-480 (uses 312- 477)

Do you use Legacy mode here?

Link to comment
Share on other sites

  • 3 weeks later...
Dennis Cherry

heystew wrote:

Dennis,
were you able to get the CCR's running in DMX mode?

THanks,
Dave

Never got an answer from anyone.

Guess no one is using DMX to run the CCR's.

I could not find enough documented and not enough time to play with the options.

Will look at it in 2012.
Link to comment
Share on other sites

I must have missed this as im using my LOR controllers in DMX im actually using my CCR controllers with 6803 modules.

But i have used them in normal mode as 150 channel DMX controllers without macros and they have not missed a beat.

For further info on running RGB controllers in DMX please refer to this presentation.


http://auschristmaslighting.com/forums/index.php/topic,1139.0.html

Link to comment
Share on other sites

Dennis Cherry

edvas69 wrote:

I must have missed this as im using my LOR controllers in DMX im actually using my CCR controllers with 6803 modules.

But i have used them in normal mode as 150 channel DMX controllers without macros and they have not missed a beat.

For further info on running RGB controllers in DMX please refer to this presentation.


http://auschristmaslighting.com/forums/index.php/topic,1139.0.html


Thank you Eddy, should have known you would have the answer.

Love the Powerpoint.
Link to comment
Share on other sites

  • Don locked this topic
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...