bwhitehead Posted November 27, 2011 Share Posted November 27, 2011 I have 6 ccr an I am using Brian B superstar sequence that I purchased from him. The issue I am having is one of the ribbons when all white is supposed to happen the one ribbon will won't be white its almost blueish white. Then if I shut down SE and restart the one ribbon is all white and the other five are the blueish white? I have updated all the firmwares on all controllers, hard resets, checked the programing etc. Any ideas?Thanks,Brandon Link to comment Share on other sites More sharing options...
mbettez Posted November 27, 2011 Share Posted November 27, 2011 all controllers are set to regular and not legacy? Link to comment Share on other sites More sharing options...
bwhitehead Posted November 27, 2011 Author Share Posted November 27, 2011 Regular! Link to comment Share on other sites More sharing options...
mbettez Posted November 27, 2011 Share Posted November 27, 2011 make sure your cat5e is in pristine condition. Last year I had lots of network problems trying to use some cat5 cable I had laying around the house. This year I replaced all the cat5 with brand new cat5e and haven't had a network issue yet. Link to comment Share on other sites More sharing options...
bwhitehead Posted November 27, 2011 Author Share Posted November 27, 2011 I made all my cat 5 cables. They all tested fine with my tester. Link to comment Share on other sites More sharing options...
Recommended Posts