Harbs Posted November 13, 2011 Share Posted November 13, 2011 Was wondering about what size circle do you need to mount a single CCR ribbon on?What size PVC did you use?ThanksHarbs Link to comment Share on other sites More sharing options...
Dennis Laff Posted November 13, 2011 Share Posted November 13, 2011 Hi i made 4 circles out of 3/4 grey pvc electical conduit from lowes cut pvc to 17ft and bent into circle the pvc fits into itself one end is bigger so pipe fits in Link to comment Share on other sites More sharing options...
Jim Saul Posted November 13, 2011 Share Posted November 13, 2011 Here is some info.http://forums.lightorama.com/forum79/27811.html Link to comment Share on other sites More sharing options...
duner10 Posted November 16, 2011 Share Posted November 16, 2011 Here is what my circles looked like last year... Link to comment Share on other sites More sharing options...
jaimwolfe Posted November 21, 2011 Share Posted November 21, 2011 I just built 6 circles from 3/4" schedule 40 20' sticks. They have the 1 flared end. I cut them to 196", and they stuck into themselves about 2-7/8", so it was really down to ~193.5" total, but with the way you have to buckle up the CCR to get it facing forward, it works out perfect. I didn't have to heat them up or anything, they bend pretty easily. Attached files Link to comment Share on other sites More sharing options...
Recommended Posts