BobinFL Posted October 25, 2011 Share Posted October 25, 2011 I have LOR III w/ 2 CCRs installed on my desktop and on two laptops. My routines include regular controllers and CCR controllers. The routine works fine on the desktop. I unplug the USB cable, plug it into the laptop and the CCR portion will not play on either of the two laptops. I put a 16 channel controller in the network with a lamp plugged in to make sure the routine was actually getting to the hardware.I am playing from a thumb drive to make sure I am using the same routine on all machines. I tried a small CCR chase routine and it works fine on all machines.Confused-Bob Link to comment Share on other sites More sharing options...
BobinFL Posted October 25, 2011 Author Share Posted October 25, 2011 Solved my own problem!Since the CCR routine is inserted into a regular LOR routine as a subroutine you have to have that subroutine on the computer you are using or just the LOR portion will play. Duh I must be slower then usual; today.Bob Link to comment Share on other sites More sharing options...
Recommended Posts