ericnagel Posted October 18, 2011 Share Posted October 18, 2011 Not "ha-ha" funny, but "???" funny.I put a Twinkle Random (8, RGB) in my display. When I ran the sequence from any point before the Macro started, only a few sections turned on.When I started the sequence from the exact point the Macro started, it was what I expected.My values were:CM: 8CS: 100CI: 50Changed it to:CM: 8CS: 99 <-- the changeCI: 50Now everything's fine.No question here, just hoping to help someone that may be new to CCR macros, like myself. Link to comment Share on other sites More sharing options...
ericnagel Posted October 18, 2011 Author Share Posted October 18, 2011 OK, I was wrong. That wasn't exactly it. Has to do something with the CCR being turned off & the sequence stopping, versus turning off (doing nothing) and hitting another Macro.Macro (nothing) Macro2nd Macro is same as first, but doesn't work when play starts before 1st MacroPlaying from the (nothing), the 2nd Macro works fine.Is there a "reset" command to send?I'll go back & RTFM. Link to comment Share on other sites More sharing options...
ericnagel Posted October 18, 2011 Author Share Posted October 18, 2011 OK, I think I got it (again)There's a note in the manual about unpredictability & sending commands. So I send CS and CI a beat ahead of turning CM on.I looped this part of the sequence & watched it a few times, and everything seems to work great now. Here's what it looks like in the visualizer (image)CS and CI are turned on (99% and 100% (on)).CM turns on (8%) for 2nd and 3rd beats, then is off for 6 beats.CM is back to 8% for 5 beats, then offThen I turn CS and CI off for the fun of it.This probably solves so many of my Macro issues I've been having... don't send all commands at the same instance! Oh, and read the manual... the answers are in there. Attached files Link to comment Share on other sites More sharing options...
Recommended Posts