Marty Spain Posted September 20, 2011 Share Posted September 20, 2011 Hi All,I am waiting for my ServoDog to arrive from LOR, but have been reading up on configuring the ServoDog controller through the users manual.When I add extra channels in the sequence editor for setting up servos ,should I be using Digital IO Card in the pull down menu for adding a device?I did not see anything regarding configuring the sequence editor for this.Marty Link to comment Share on other sites More sharing options...
Denise Brunner Posted September 21, 2011 Share Posted September 21, 2011 Marty,It configures just like a 8 channel LOR controller, nothing different !! Link to comment Share on other sites More sharing options...
Marty Spain Posted September 21, 2011 Author Share Posted September 21, 2011 Denise,So when I add the channels for the servodog and go to set up the type of device( from the pull down menu) , use LOR controller? Sorry if I seemed confused about this. When I get my ServoDog and hook it up maybe it will be clearer. Link to comment Share on other sites More sharing options...
Dan C Posted September 21, 2011 Share Posted September 21, 2011 Just right click over the channels on the left side. Select add device (above or below) then from the list of Devices, ServoDog is at the bottom. LOR Version 2.9.4 Link to comment Share on other sites More sharing options...
Marty Spain Posted September 21, 2011 Author Share Posted September 21, 2011 Thanks Dan! I was having brain lockup. I was going in add channel instead of device! I am waiting for my ServoDog controller to arrive from LOR I can then dive into this more. Link to comment Share on other sites More sharing options...
Marty Spain Posted September 21, 2011 Author Share Posted September 21, 2011 Denise I was having brainlockup and has Dan C had to start my brain !I was going into add channel instead of device! So I am better now! Link to comment Share on other sites More sharing options...
Denise Brunner Posted September 21, 2011 Share Posted September 21, 2011 Thats correct Marty, just use LOR controller Link to comment Share on other sites More sharing options...
Recommended Posts