ericnagel Posted September 9, 2011 Share Posted September 9, 2011 Just got my CCRs, and have been playing with them. Not knowing how many units I'll end up with, I put the CCR as unit "0A". Everything worked in the hardware utilityWent to the sequencer, set everything up, no lights. Yes, the unit numbers matched, the com port was set right in Network settings, and Play > Control Lights was checked on.I searched & searched, about to cry for help. Then I decided to set the unit number to 04. Now I can control the lights via the sequencer.Not that it matters to me (I've got things working w/ the CCR w/ ID 04. I don't plan on using more than 48 channels (hahahahaha!)) but does anyone have their CCR running on an "alpha" channel, such as "0A"? Link to comment Share on other sites More sharing options...
Geoff Harvey Posted September 9, 2011 Share Posted September 9, 2011 HiI run my CCRs at 0F without problems using the S2 advanced software.Check which software level you are using as I think the software level limits the maximum unit ID you can use.Regards Geoff Link to comment Share on other sites More sharing options...
ericnagel Posted September 9, 2011 Author Share Posted September 9, 2011 Yep - that's it!I'm using the Standard software that supports 8 controllers. I guess those would be 01-08, not any 8Nice catch!Eric Link to comment Share on other sites More sharing options...
Recommended Posts