shredocaaster Posted March 27, 2011 Posted March 27, 2011 So I had everything running smooth, now all of a sudden my Hardware utility won't find my ribbon controller. Is there a way to check if the CR150D is not working? Other suggestions?Thanks
trankin79 Posted March 28, 2011 Posted March 28, 2011 I had the same problem, I did the refresh in the hardware utility, made sure it was the ONLY thing on the network, then set the ID number again. I then changed the existing ID, old ID I set to Any unit, new set to whatever. I got the success, shut the controller down, waited 10 seconds, plugged it back in and all was well again.
Dennis Cherry Posted March 28, 2011 Posted March 28, 2011 If you have 2 controllers with the same ID number only one will show up on the list.Like Trankin79 said, only connect the CCR controller and do a refresh.
shredocaaster Posted April 4, 2011 Author Posted April 4, 2011 For the help I thank you all - turns out it was my usb to usb485 cable - works on my camera and all and yet not this. Tried a different cable and TADA! Weird.
Recommended Posts