keithr Posted March 15, 2011 Share Posted March 15, 2011 Will the CCR and CCb's still require our current controllers or something new? Link to comment Share on other sites More sharing options...
Don Posted March 15, 2011 Share Posted March 15, 2011 The CCR's have their own controller. (Have had since day 1.)Don't recall off the top of my head of the CCB's will use their own controller, the CCR controller, or their own. Link to comment Share on other sites More sharing options...
toddmoon Posted March 15, 2011 Share Posted March 15, 2011 Just wondering if the CTB16PC units will be updated with the new control system over the power lines and eliminate the need for Ethernet lines?If this update did happen how would it effect the price of the unit? Link to comment Share on other sites More sharing options...
LightORamaDan Posted March 16, 2011 Share Posted March 16, 2011 toddmoon wrote: Just wondering if the CTB16PC units will be updated with the new control system over the power lines and eliminate the need for Ethernet lines?If this update did happen how would it effect the price of the unit?Currently, there are no plans to upgrade the CTB16PC to communicate via PLC.Dan Link to comment Share on other sites More sharing options...
-klb- Posted March 16, 2011 Share Posted March 16, 2011 For 2011, I have 5 trees in the city show that will each have 4 CTB16PC controllers, each powering 5 amps of LED lights. Based on the current PLC design, I would only be able to inject signal to two controllers at a time.Separately, I am actually looking into getting each controller onto its own GFCI, so that I minimize ground fault trips. I would loose that ability if I used PLC to them. Link to comment Share on other sites More sharing options...
Recommended Posts