randall Posted January 31, 2011 Posted January 31, 2011 assembled first kit today. then noticed i didnt push the triacs all the way down on one side. will this be a mistake later? have not powered on yet..
ace_master Posted January 31, 2011 Posted January 31, 2011 As long as you have a solid solder connection on each pin, and the pins aren't contacting any other parts of the board or wiring, you should be fine.
-klb- Posted January 31, 2011 Posted January 31, 2011 Also, as long as any heat sinks you have will attach correctly.. There is some accomodation in the spacing of the high power heat sinks, but not a bunch..
randall Posted February 1, 2011 Author Posted February 1, 2011 Thankyou. Yes, heat sinks bolt on nicely. Using larger heatsinks than provided though. Have 4 of these bords that I am mounting in a. Transparent computer tower. I will post pics when project is completed. Thanks again.
Fabian Posted February 1, 2011 Posted February 1, 2011 randall wrote:Have 4 of these bords that I am mounting in a. Transparent computer tower.Don't forget you'll need adequate cooling:
randall Posted February 1, 2011 Author Posted February 1, 2011 i think someone went a little overbord on the cooling. in my opinion why didnt you just mount them in a box with a air conditioner.
Ron Amedee Posted February 1, 2011 Posted February 1, 2011 Randall saidi think someone went a little overbord on the cooling. in my opinion why didnt you just mount them in a box with a air conditioner.Now what kinda geek would pick the obvious way to do ANYTHING !!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now