Guest guest Posted October 26, 2006 Share Posted October 26, 2006 Just a thought. There is such a thing as press in captive stand offs. These are pressed into a hole that is slightly smaller than a knurled portion of the stand off. These are often used for mounting hardware on PCB's, so they typically only require a hole about 0.060" deep - much less than the 0.250" thick PVC enclosure. Try McMaster Carr and search part number 92985A310. These are 1/4"tall 6-32 stand offs with the 0.060" deep insert that will mount in the PVC.....just not all the way through. A touch of epoxy wouldn't hurt, but if the mounting hole is sized properly the knurled portion of the insert has pretty gppd holdong power. Link to comment Share on other sites More sharing options...
Recommended Posts