Nixay Posted December 2, 2010 Share Posted December 2, 2010 Hi guys,For the life of me I can't find the table that lists the unit id to DMX address list.I have one 16 channel controller being used within a DMX environment this year and I just need to know how to assign it's starting channel!Could someone point me in the right direction?- Nixay. Link to comment Share on other sites More sharing options...
Ponddude Posted December 2, 2010 Share Posted December 2, 2010 Page 33 of the user manual...http://www.lightorama.com/PDF/iDMX-1000_Man_Web.pdfAlso, just realize that one unit ID takes up 16 channels. So, if your unit ID of the iDMX is set to A1, than unit ID A1 will take up the 16 channels. A2 will take up 17-32. A3 will take up 33-48....you get the point. Link to comment Share on other sites More sharing options...
Tim Fischer Posted December 2, 2010 Share Posted December 2, 2010 I think he might be asking the opposite: how to set the DMX ID when using an LOR controller on a DMX network. Here's the table for that:http://www.lightorama.com/Documents/DMX-DOC.pdf Link to comment Share on other sites More sharing options...
Nixay Posted December 2, 2010 Author Share Posted December 2, 2010 That's right, I'm connecting a LOR controller up to a DMX lighting console within a stage lighting rig.I knew I'd seen that document somewhere before but I couldn't find the link on the new website layout. Thanks!- Nixay. Link to comment Share on other sites More sharing options...
Recommended Posts