heystew Posted November 23, 2010 Share Posted November 23, 2010 I have one (out of 8) iDMX controllers that will not respond to commands from LOR or the Hardware utility. The hw utility can find the unit when doing a search, and I am able to change it's ID. However it does not appear to control the lights connected to it. I can replace the unit with another and it will work fine.I've upgraded firmware, i've reset the device. I vaguely remember having to flash the unit just to be able to set it's ID.Is there anything that I've missed that I should be trying?thanks,Dave Link to comment Share on other sites More sharing options...
LightORamaDan Posted November 26, 2010 Share Posted November 26, 2010 It could be a failed communication chip on the DMX side of things. It sounds like it is responsive to LOR so it is working...I recommend you open a ticket on the LOR Help Desk: http://lightorama.com/support/Dan Link to comment Share on other sites More sharing options...
Recommended Posts