CTB08 not found only sees CTB16D

[Tim from St.louis]

I get this message for the CTB08 controller, 01 - UNKNOWN DEVICE

When I do a scan all boxes with CTB16D are found

It been a couple of years since I used LOR, I need some help

I have 7 LOR boxes, 4 CTB08 ver 1.0 boxes and 3 CTB16D ver 4.01 boxes. I bought the advanced LOR software for $139.95 last night

When I used the Hardware Utility and scan I always see all three of the CTB16D ver 4.01 but never all 4 CTB08 only one
CTB08 shows up sometimes.

This is the message I get almost ever time 01- UNKNOWN DEVICE ????

Instead of showing any of the CTB08 units I get this message 01- UNKNOWN DEVICE ????

I do get the right message ever once in awhile in the list but never for all 4 only one shows up sometimes as unit 01 CTB08 ver 1.0

But these NEVER show up in the list found unit 03 CTB08 ver 1.0 , unit 04 CTB08 ver 1.0, unit 05 CTB08 ver 1.0



The boxes are daisy chained like this with ethernet cables

START ------- unit 01 CTB08 ver 1.0 --------Unit 02 CTB16D ver 4.01-------- unit 04 CTB08 ver 1.0-----------unit 07 CTB16 ver 4.01--------unit 03 CTB08 ver 1.0------------------unit 05 CTB08 ver 1.0----------unit 06 CTB16D 4.01

It sees and finds the unit 06 CTB16D 4.01 at the end of the chain 60ft down the line,

[-klb-]

Try those units connected individually, and make sure they really are at the expected ID numbers.

[Tim from St.louis]

I got it, I had to reassign the ID numbers:)



but only the 4 CTB08 boxes not the 3 CTB16D boxes, STRANGE STUFF



Thanks for the clue