Donny Pacheco Posted November 18, 2010 Share Posted November 18, 2010 I am having trouble hooking the RF units up, it won't get the config from the unit.Can anyone helpDonny Link to comment Share on other sites More sharing options...
TJ Hvasta Posted November 19, 2010 Share Posted November 19, 2010 Donny, what are you trying to do? RF's? You dont mean Rainbow Floods do you? Link to comment Share on other sites More sharing options...
Dave Batzdorf Posted November 19, 2010 Share Posted November 19, 2010 If you are referring to the rf ELLs, they have to be the only thing connected to the PC for the initial programming. Link to comment Share on other sites More sharing options...
JBullard Posted November 19, 2010 Share Posted November 19, 2010 Dave Batzdorf wrote: If you are referring to the rf ELLs, they have to be the only thing connected to the PC for the initial programming.Exactly correct information. I use three of them every year. Link to comment Share on other sites More sharing options...
LightORamaDan Posted November 21, 2010 Share Posted November 21, 2010 As mentioned only one should be connected to the PC at a time. Also make sure the ELL is connected and powered on before you start the Hardware Utility Program.Also, in general no configuration is required with the ELLs however in some extraordinary cases the configuration does need to be changed.Dan Link to comment Share on other sites More sharing options...
Recommended Posts