bob Posted September 10, 2010 Share Posted September 10, 2010 OK, I've found something where someone had a similar problem (not with LOR, but with some unrelated program), and he or she was able to fix it in the following way:(1) Stop all of your running programs (such as the Sequence Editor).(2) Change your DPI setting to something smaller than 100% (the person who I got this from used 75%).(3) Reboot.(4) After the computer starts up again, change your DPI setting back to 100%.(5) Reboot.(6) Try the Sequence Editor again, to see whether or not the problem has been resolved. Link to comment Share on other sites More sharing options...
Tom L. Posted September 10, 2010 Author Share Posted September 10, 2010 bob wrote: OK, I've found something where someone had a similar problem (not with LOR, but with some unrelated program), and he or she was able to fix it in the following way:(1) Stop all of your running programs (such as the Sequence Editor).(2) Change your DPI setting to something smaller than 100% (the person who I got this from used 75%).(3) Reboot.(4) After the computer starts up again, change your DPI setting back to 100%.(5) Reboot.(6) Try the Sequence Editor again, to see whether or not the problem has been resolved.Bob, I tried the above up to #2. Win 7 will not allowme to set the DPI lower than 100%, so I went to 125 % then went on to step 3, 4, 5 and 6. The problem was the same.However I set the DPI at 125 % and kept it there. The problem was fixed. :DBob, Thank you for the valuable assistance - Tom Link to comment Share on other sites More sharing options...
Recommended Posts