jeffgilchrist Posted November 23, 2016 Share Posted November 23, 2016 I recently purchased the Pixcon16 to run some arches and trees using smart pixels. I have followed the instructions in the manual and read some on this board but still cannot get my laptop to recognize the pixcon16. I get a solid green light and blinking red. Running windows 10 with version 4.2.12 of the LOR software. Things I have tried: turning off my wireless running in DHCP Running static using the default IP running the diagnostic tool that pops up in the configuration program using a validated cat5 cable At this point I am frustrated and asking for help, I'm sure it is something easy but it alludes me right now. Thanks, Jeff Link to comment Share on other sites More sharing options...
jeffgilchrist Posted November 23, 2016 Author Share Posted November 23, 2016 oh, I also turned off my firewall and still nothing Link to comment Share on other sites More sharing options...
jeffgilchrist Posted November 23, 2016 Author Share Posted November 23, 2016 I think I may have figured it out, I have my laptops network adapter set to the exact same static IP address as my pixcon16 - 192.168.0.50 - When I get home tonight I will change the laptop to 192.168.0.100 and see if that works. Link to comment Share on other sites More sharing options...
melody Posted November 26, 2016 Share Posted November 26, 2016 I can't get my green light to come on in anything but bootloader any ideas. Link to comment Share on other sites More sharing options...
Recommended Posts