Jim Hans Posted January 14, 2010 Posted January 14, 2010 If I go to TOOLS and FADE OPTIONS I see that there are 10 pre-set fade option. I want to use the 0-25 fade up option and the 25-0 fade down option. How do I do this? When I click fade up or down button it always goes from 0-100 or 100-0.I know I must be missing something pretty obvious here. Any help would be great. I also have the same question for setting intensity. Default appears to be 50%. How deo I get a 25% intensity.Thanks in advance.
-klb- Posted January 14, 2010 Posted January 14, 2010 Click the ? mark over steps button (intensity tool) Click on edit. You can set what percentage each option is in the intensity tool. Then, when you click one of those settings in the tool, any further use of the intensity tool will give that level, until you next select a different value.Ramps are much the same...
Jim Hans Posted January 14, 2010 Author Posted January 14, 2010 I knew it was something simple. THANKS!!!!!
Recommended Posts