Jade Rymkos Posted January 13, 2010 Share Posted January 13, 2010 Hi,Last year was my first year sequencing and I would like to update my sequences from last year and create new sequences. I used several manufacturers white LEDs and noticed they had different intensities when fully on. To correct the problem I went into every sequence and manually changed the channel's cell programming. I had 30+ sequences and it took me a lot longer than I expected. I'm not sure my solution was the right way to go. Is there a way to change the maximum intensity for an individual channel?Thanks in advance for your help, Jade Link to comment Share on other sites More sharing options...
Rick Hughes Posted January 13, 2010 Share Posted January 13, 2010 I believe the intensity setting is for the entire controller (hoping someone will tell me I am wrong about that).I would *really* like to be able to set maximum intensity by channel and have the software do the calculated adjustments.Same reason ... LED brightness varies from brand to brand, and color to color. Link to comment Share on other sites More sharing options...
Surfing4Dough Posted January 13, 2010 Share Posted January 13, 2010 Might be a nice addition if can't figure it out.Send the idea to: wishlist@lightorama.com Link to comment Share on other sites More sharing options...
Rick Hughes Posted January 13, 2010 Share Posted January 13, 2010 Has been submitted. Link to comment Share on other sites More sharing options...
Recommended Posts