Roger Leon Forbes Posted December 1, 2009 Share Posted December 1, 2009 I have one channel on LOR #7 set to be on all times, dureing some sequences it chatters and pluses on and off at a fast rate. I have reset it, removed it and added it back and it still does it. What am I doing wrong? Should it be set as background effective? What it does is operates a relay that inturn actives the cutoff of all static display dureing show. Link to comment Share on other sites More sharing options...
Roger Leon Forbes Posted December 1, 2009 Author Share Posted December 1, 2009 I found it, guess you can call me dum dum, after going back and checking everyting again I found I had assigned an effective to wrong channel, working great now. What I did was take a 24 volt coil relay, make/break. The out put from the LOR channel is applied to a 24 volt transformer witch operates the relay. The relay was takening from an heat and air controll unit, contacts are rated at 15 amps. I used two to them witch gave me 4 static display outputs. When the sequence starts it turns off the display. Thanks for the help everyone. roger Link to comment Share on other sites More sharing options...
Recommended Posts