rcpandr Posted November 19, 2009 Share Posted November 19, 2009 In the grid I can only see and edit 16 channels ( 1 page). If I print it out all 6 units, 96 circuits, and names are there. Any ideas on how to see the other 5 pages. Attached files Link to comment Share on other sites More sharing options...
-klb- Posted November 19, 2009 Share Posted November 19, 2009 Do you only have the one controller in track one? There is a drop down at the top to select which track you are looking at the data for. Link to comment Share on other sites More sharing options...
Brian Mitchell Posted November 20, 2009 Share Posted November 20, 2009 Edited.....Never mind..... Link to comment Share on other sites More sharing options...
rcpandr Posted November 20, 2009 Author Share Posted November 20, 2009 Only have one track. Thats all there is in the drop down. Link to comment Share on other sites More sharing options...
bob Posted November 20, 2009 Share Posted November 20, 2009 Very strange! There should be a scroll bar on the right hand side.Could you please send me the sequence (bob@lightorama.com)? I don't know why this would be happening, and I kind of doubt it's related to the sequence, but I'd like to check to be sure.One possible workaround:Duplicate the track. Switch to the new track 2, and delete the first 16 channels from it. You now have a track with 80 channels, which (in the Channel Property Grid) will display channels #17-32.Then duplicate track 2, switch to the new track 3, and delete the first 16 channels from that. You will now have a track with 64 channels, which (in the Channel Property Grid) will display channels #33-48.And so forth. Link to comment Share on other sites More sharing options...
rcpandr Posted November 24, 2009 Author Share Posted November 24, 2009 My display was set at 120 DPI. Changed it to 96 DPI and now I can see the scroll bar on the right side of the screen. Thanks Bob Link to comment Share on other sites More sharing options...
Recommended Posts