Jump to content
Light-O-Rama Forums

S2 Version 2.6.0 Released


Recommended Posts

Version 2.6.0 of the software has been released. A brief summary of the changes will be listed later in this post, but first:

For the complete change log, please refer to the help file's "What's New" page, which you can see online at:


You can get the installer for the new version from the software download page:


If that page says a version number other than 2.6.0, please try hitting your browser's "refresh" button.

Now, a brief summary of the changes:

  • Undo/redo recording can now be disabled; this is intended as a way to speed up extremely large operations (such as skewing an entire track with many channels and events).
  • The Basic license level previously saved sequence files encrypted; they are now saved unencrypted, as plain XML, like all other license levels. Only the unlicensed Demo version now saves encrypted.
  • The Hardware Utility can now display the firmware version of a connected MP3 director.
  • A new version of the DC-MP3 firmware is included, which adds one feature and fixes two bugs:
    • Output #8, which was previously unused, will now be high (+5 volts) if a show is active, and zero otherwise.
    • In some rare cases, when a sequence started playing (on the DC-MP3), the music and lights would start off significantly out of sync with each other.
    • A bug caused triggers #6 and #3 to interact in some cases.

    [*]A new version of the Servo Dog firmware is included, which fixes a bug where having both channels 1 and 8 in digital output mode would cause random results due to crosstalk.[*]Bug fix: In the Animator window, certain ways of scrolling through the channel dropdown list weren't working properly.[*]Bug fix: Skewing a track would fail if the timing grid currently in use by the track was a fixed grid.[*]Bug fix: In the Servo Dog Utility, clicking on a channel button when there was already a channel button selected could cause the channel that was clicked to have its configuration set to the same values as the channel that was previously selected.[*]Bug fix: In the Hardware Utility, controllers that were connected via Easy Light Linkers were not showing up in some cases.

Please Note:

If you upgrade to this from an earlier release, it might ask you to activate your license again. This will not use up one of your license seats.

Link to comment
Share on other sites

  • Create New...