ksr Posted October 26, 2009 Share Posted October 26, 2009 I build a sequence and it runs the lights with music fine from the sequence builder. However, when I attempt to build and run a show with the sequences that I just built--some of them run fine while others don't play at all from the Show Builder. There's one sequence that just gets skipped, like it's not there in the show and another that does not play the lights correctly, but does play the music. The rest seem to play fine. Can't figure this one out. Would welcome any suggestions.Thanks,Keith Link to comment Share on other sites More sharing options...
cmoore60 Posted October 26, 2009 Share Posted October 26, 2009 What version of the software are you running? Version 2.5.2 and forward have a log that is kept as your show plays. It will show what is happening with each sequence. this may help you diagnose the reason for your problems.Chuck Link to comment Share on other sites More sharing options...
ksr Posted October 26, 2009 Author Share Posted October 26, 2009 Yes, mine is old-last years. Says 1.6.4. I'll give that try. Thanks for the help!Keith Link to comment Share on other sites More sharing options...
cmoore60 Posted October 26, 2009 Share Posted October 26, 2009 Since you will be updating software. You will need to retrieve your license code. To do that you will need the email address that you used when you purchased your original software from LOR.The current version released today is 2.5.6Chuck Link to comment Share on other sites More sharing options...
Recommended Posts