Guest guest Posted December 3, 2005 Share Posted December 3, 2005 I had a question regarding the sequence editor. This is my first year using the software. Here's an example of my problem.I have channels 1 and 2 programmed already. Let's say they alternate every second. 1 then 2 then 1 etc.For channel 3 and 4, I want them to alternate every .5 second. But my grid is already setup with events every second, not .5 seconds. When I insert events to allow this to happen, it obviously also inserts events for channel 1 and 2, thus causing them to alternate every .5 seconds. Is there no way to add events without altering the timing of the other events?I would understand if you couldn't. I would just need to adjust the other channels, but I thought I would ask.Thanks,Jeremy Link to comment Share on other sites More sharing options...
Guest guest Posted December 4, 2005 Share Posted December 4, 2005 My experience is like you described - adding an event will effect every channel so you'll need to go back and adjust some of your existing events. Welcome to the LOR family ... it's a sensational product, and the folks here at PlanetChristmas are top notch in offering assistance. Link to comment Share on other sites More sharing options...
Guest guest Posted December 4, 2005 Share Posted December 4, 2005 I start my sequence out with the Max events I plan on using. So for amination sequences I usually set it to .05 or .1 seconds to start out. Link to comment Share on other sites More sharing options...
Recommended Posts