paologabo Posted July 12, 2009 Share Posted July 12, 2009 Hi!I'm interested in 16 Channel Starter Package productI live in Italy and we have 220 V power supply.Is it possible to use LOR products with this power supply and connect lights at the outputs that work at 220 V?Thank You (and sorry for my english)Paolo Link to comment Share on other sites More sharing options...
JBullard Posted July 12, 2009 Share Posted July 12, 2009 LOR has provided units for 240 volts @ 50 Hz for the UK standards. I'm sure they possibly could for your situation.They would probably need to know what frequency your power uses 50 hz or 60 hz. Link to comment Share on other sites More sharing options...
Alan C Posted July 12, 2009 Share Posted July 12, 2009 I can confirm that LOR will work on a 230v / 50Hz supply. There is a link on-board for the transformer that powers the electronics, which is settable for either 120 or 230 volts. You will need to check that this is set correctly!Using 230v, I have successfully powered LEDs that need 24v - my solution was to use the LOR board to run the 230/24v transformers. Again, this works well.Regards,Alan. Link to comment Share on other sites More sharing options...
paologabo Posted July 12, 2009 Author Share Posted July 12, 2009 Thanks for reply!!Now I can buy the product without doubts. Link to comment Share on other sites More sharing options...
Recommended Posts