Guest guest Posted June 5, 2006 Share Posted June 5, 2006 i have a CTB16D and channels 1 to 8 are dead ive rechecked and rechecked wires it just wont work i got this during the sale this is the 2nd one ive put together first one works perfecti still have 9 more cards to try out but this will take some time any idea's?i also swaped fuzes from 1-8 to 8-16 still dont work Link to comment Share on other sites More sharing options...
Guest guest Posted June 5, 2006 Share Posted June 5, 2006 You might email LOR direct about this. Perhaps they have some tips that might help, or at the least will help troubleshoot the board and/or provide a solution.Tom Link to comment Share on other sites More sharing options...
Guest guest Posted June 6, 2006 Share Posted June 6, 2006 The most obvious thing is to contact Dan directly about this. Dan will take care of any problem immediately.Jeff Link to comment Share on other sites More sharing options...
Guest guest Posted June 6, 2006 Share Posted June 6, 2006 alright thanks Link to comment Share on other sites More sharing options...
Guest guest Posted June 6, 2006 Share Posted June 6, 2006 warcraft wrote: i have a CTB16D and channels 1 to 8 are dead ive rechecked and rechecked wires it just wont work i got this during the sale this is the 2nd one ive put together first one works perfecti still have 9 more cards to try out but this will take some time any idea's?i also swaped fuzes from 1-8 to 8-16 still dont workMany of the suggestions seem pretty lame but they have all happened.My first guess would have been the fuse but you beat me to that one:). The other guess is that the power cord on that side does not work or it is plugged into an outlet that does not have power.If you are using jumpers to get power to the other side make sure that they are in the correct positions. If you do have a meter carefully check to see that there is power on both sides of the fuse.If it is not the fuse or power cord or jumper then we will replace the card. Make sure to send an email to info@lightorama.comEdit: Fixed a spelling error. Link to comment Share on other sites More sharing options...
Guest guest Posted June 7, 2006 Share Posted June 7, 2006 Was told that the card does work:) Link to comment Share on other sites More sharing options...
Recommended Posts