Rjp Posted Tuesday at 01:53 PM Share Posted Tuesday at 01:53 PM I have a singing pumpkin that is not lighting up right it’s almost as if it is turned sideways it is the controller that came with it the rest of the pumpkins are fine it’s set to the right unit id i even put a new data wire and tried it by itself I’m using the LOR Preview for it any ideas on what’s going on 74948359004__CA24A71B-54EB-42B4-9C02-AF07A3DD9B2E.MOV Link to comment Share on other sites More sharing options...
TheDucks Posted Tuesday at 07:22 PM Share Posted Tuesday at 07:22 PM Is this a LOR controller? Press the white Test button (it is inside the Pixie box). That runs a test pattern on all nodes. I suspect you have a failed node, which stops all the later nodes from getting data. The reason one side is working, is you use both cables from the Pixie2 Link to comment Share on other sites More sharing options...
Orville Posted Friday at 07:20 PM Share Posted Friday at 07:20 PM (edited) Did you set the LOR singing pumpkin prop up in the Pixie 2 controller? Usually when you buy a prop and it comes with the controller, they are already set up by LOR, but perhaps the controller somehow lost the prop definition or you accidentally changed it. So I'm thinking perhaps you need to reload the prop definition file back into the Pixie 2. If the prop isn't set with the correct LOR prop profile definition in the Pixie 2, odd lighting patterns like I saw in your video can happen. Edited Friday at 07:21 PM by Orville Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now