Pixie 4 controllers

[marty h]

Adding 8 arches this year in RGB strings.  Each arch will have a 50 rgb set on them.  I have 2 pixie 4 controllers.   I think I know what the settings should look like but not sure. 

Any help with what the unit setting on each controller and each string would be appreciated. 

 

Thanks and have a great day. 

 

Marty

[TheDucks]

Out of the box is usually good as 50 is a default. You only need make 2 settings in most cases.

ID (many of us set the switches to Zero, and HU to set the ID instead, YMMV) remember ID is in Hexadecimal... And a Pixie4 consumes the next 3 from what you set.

The ID may be hard coded into PURCHASED sequences, then to need to use that. Other than that, roll your own  (💡 I leave a Pixie4 sized gap on initial assignment. One did grow up to a Pixie 8 😁with no changes needed to existing sequences: 20 + 28, 30 + 38, 40, initially. HU stops scanning at 47)

Color order of your strings (this is per port on the advance Pixie Configuration in HU)